How do you fix flashing lights on a Puffco
When reattaching the atomizer, make sure to screw it firmly into the base. If the atomizer hasnt been cleaned in a while or theres any sticky material flooding the part, it might be best to soak the entire atomizer in ISO, let it fully dry, and then do it again.
Why is my Puffco plus blinking
When the Puffco Plus battery needs to be recharged, the light on the battery will flash ten times. Use the charger that came with your Puffco kit to do so.
Why is my SOC blinking white
Here are the SOC Peak Dab Rigs instructions. 1. Make sure the device is fully charged; it will blink white while charging and turn off when finished.
Why do Puffco peaks blink 5 times
If the light is flashing five times, there is a short circuit somewhere in the device. For more help, get in touch with our support team.
Why wont my Puffco plus heat up
If your chamber wont heat even though the battery is operating as it should, there may be a connection problem. In this case, we always advise cleaning the gold connection pins on the top of the battery and the bottom of the chamber.
Can you use Puffco Peak Pro while charging
Battery and charging Technically, you can use the Puffco Peak while its charging, but its not advised because the Peak wont actually be charging because all the power will be used to heat it up.
How long is Puffco peak warranty
One Year Puffco Peak Warranty – Cream City Vapes
How do you know when a Puffco is charged
The light will pulse while charging and will automatically turn off once the device is fully charged; all you have to do is plug the base of your device into a wall outlet using the USB C charger that comes with your Peak.
How do I pair my Puffco pro
The first step is to pair your Peak Pro with your phone. To do this, press and hold the power button on your vape until it glows blue, make sure bluetooth is turned on, and then wait for the app to detect your Peak Pro.
How do you clean a Puffco atomizer
Atomizer can be cleaned by soaking the entire assembled piece in Isopropyl Alcohol (99% preferred); DO NOT RINSE WITH WATER AS WATER EXPOSURE TO CERAMIC CAN POTENTIALLY DAMAGE THE PART; and make sure to clean the gold connector pin on the base and bottom of atomizer with Iso soaked cotton swab as well.
How often should I clean my Puffco peak
The Peak should be thoroughly cleaned each time the battery completely drains and requires recharging, and the atomizer should be immersed in ISO whenever you notice excessive flooding or receive a rainbow light response from the device.
How much is a Puffco atomizer
Purchase a 3-Pack for $99.95 or a Single Peak Atomizer for $39.95.
How do you clean Puffco plus
Puffco Plus Cleaning: Quick summary
- Take apart the vape, then soak the chamber and dart.
- The mouthpiece housing should be cleaned.
- After rinsing, dry off the dart and chamber outside.
- Reassemble.
- Done!
When did the Puffco Peak Pro come out
Background. The Peak Pro was released in November 2020 and has significant improvements over the original Peak, including an improved heating element, real-time temperature control, and wireless charging. The original Peak was first released in early 2018 and is regarded as a game-changer in the industry.
What does it mean when Puffco flashes all colors
The first suggestion is to remove the atomizer, clean the connection pins with a cotton swab dipped in iso, and then reattach the atomizer. The rainbow light is an indication that there is a connection issue between the base and atomizer and does not necessarily mean that anything is broken or defective.
What does it mean when Puffco flashes 4 times
When the colors flash through, the problem is most likely with the atomizer. Check to see if its screwed in properly and try cleaning it by soaking it in ISO for 30 minutes (Ive used other liquid bong cleaning solutions during Covid and they worked fine).
What does it mean when my Puffco flashes 5 times
Red light remains steady: Device overheated. 5 light flashes: Indicates short circuit.
Why is my Puffco blinking red 3 times
Let the Peak cool down for a little while and normal functionality/charging will resume; dont worry, this just means that the device has overheated.