How do I reset my Puffco pro
Be sure to reset both your phone and device as well; you can reset the device by holding the power button down for 20 seconds consecutively.
How do I fix my peak atomizer pro
Peak Pro
- Soak atomizer in 99% isopropyl alcohol to remove any oil from inside the atomizer.
- There is a wire welded on the bottom of the atomizer.
- Push the Puff Coil Repair pick in between the ceramic ring and the metal ring.
- You may need to move the pick in and out a couple times before you have a good lock on the ring.
Why is my Puffco plus not hitting
Sometimes even the smallest bit of debris can cause a bad connection which stops the pen from working at it's full potential. To start, we recommend that you try cleaning the gold connection pins between the battery and atomizer to alleviate any connection issues that may be occurring between the two.
Why is my Puffco Peak Pro blinking white
My Device Keeps Flashing White 3 Times. What do I do? Not to worry, this is simply an indication that your chamber is not attached. Please try removing the chamber from the base and reattaching.
Why wont my peak pro turn on
In some cases this can simply be a bug with the base that can be resolved by resetting the device. If the cleaning doesn't do the trick please try holding the power button down for 20 seconds. Upon letting go, the device should reset and restart.
Why does my Puffco Peak Pro keep turning off
Not to worry, this simply means that the device has overheated. Simply let the Peak cool down for a little while and normal functionality/charging will resume. If your device is overheating while on the charger you should expect the charge time to take a little over 2.5 hours.
Why is my Puffco flashing white
My Device Keeps Flashing White 3 Times. What do I do? Not to worry, this is simply an indication that your chamber is not attached. Please try removing the chamber from the base and reattaching.
How do I fix my Puffco Peak Pro not charging
If you're unable to get the device to charge, please try shutting the device down completely (hold the button for 3-6 seconds until you feel the device vibrate and power down) and then attaching to the charger. You may also want to try a different micro usb charger cable.
How do you fix a Puffco Peak Pro chamber
The Red-Blue-Red-Blue flashing response from your Peak Pro is a sign of a chamber connection error. Please try first removing and cleaning the chamber from the device. Submerge the chamber in 90%+ Isopropyl Alcohol for 20 minutes. Never use water – 99% ISO only!).
How do I fix my atomizer
Recap
- Clean all contacts on battery/mod, tank or pod.
- Remove and reinstall the coil (after cleaning)
- Try a new coil.
- Check the 510 pin and see if you can adjust it (mods/tanks)
- Try another tank on your mod.
- Try another mod with your tank.
- Adjust base of coil carefully if you can (mainly sub-Ohm coils)
How do I fix my Puffco plus
To alleviate clogs you can unscrew the mouthpiece and hold the pen upside down over a paper towel or hold the pen upside down using your Prism, initiate Sesh Mode for a cycle or two allowing any bi product to drip out of the holes in chamber.
Why is my Puffco Pro not working
Often, something like this can be a bug that can be resolved by simply resetting the device. If you're unable to get the device to charge, please try shutting the device down completely (hold the button for 3-6 seconds until you feel the device vibrate and power down) and then attaching to the charger.
Why is my Puffco peak blinking
The Light On My Device Sometimes Flashes Red While Charging, What Do I Do? Not to worry, this simply means that the device has overheated. Simply let the Peak cool down for a little while and normal functionality/charging will resume.
What does it mean when my Puffco blinks 3 times
3 red flashes: Indicates low battery. 5 light flashes: Indicates short circuit. Red light holds: Device overheated.
Why does my Puffco plus keep blinking
The Plus battery light will flash 10 times to indicate that the battery needs to be recharged. In order to charge the Puffco Plus battery use the charger included in your Puffco kit.
What does it mean when Puffco flashes all colors
The rainbow light is an indication that there is a connection issue between the base and atomizer & does not necessarily mean that anything is broken or defective. The first tip is to remove the atomizer, clean the connection pins with a cotton swab dipped in iso and reattach the atomizer.
How can I use Puffco pro without app
How do I use my Puffco Peak Pro?
- Fully charge the device before first use.
- Fill glass with water just above the air-holes.
- Align inlet hole on the front of the glass with chamber.
- To lock / unlock the device, hold down the button for 3 seconds. (
- Single click to toggle through heat settings.
How long does Puffco Peak Pro take to charge
How do I charge my Puffco Peak? Simply plug the base of your device into a wall outlet via the USB charger included with your Peak. While charging, the white light will pulse and the light will automatically turn off once the device is fully charged. A depleted battery will fully charge in about 2.5 hours.