How do you preheat Yocan Kodo
You can activate the Kodo vape's preheat mode by double clicking the power button. It warms your cartridge for up to 10 seconds at a time using a low output while the LED light slowly flashes. Cancel the cycle early by pressing the button again, easy peasy.
How do I change my Yocan settings
Press the power button five times to activate the battery. Select your preferred temperature setting. Press and hold the power button. Inhale from the mouthpiece when the Yocan UNI S Box Mod Vaporizer starts producing vapor.
Why does my battery blink when I try to hit it
This is often caused by a loose battery. If the battery is not screwed in properly, it won't be able to fully charge and the indicator light will continue to blink. To fix this issue, unscrew the battery and re-screw it back in to make sure everything is firmly connected.
What is the Yocan UNI for
The UNI will let you adjust the height of any oil atomizer. Plus the adjustable atomizer holder fitting different diameters, the Yocan UNI MOD is incredibly the world's first MOD that is universal for any types of oil cartridge.
Why does my Yocan pen keep blinking
Yocan Magneto
Usually, the flashing light due to incorrect connections, or coil burn out. Two tips for you as below: #1 Try to use a q-tip with Isopropyl alcohol clean the contact points. … If you continue to have problems, please retain the affected device and submit your question on Yocan Vaping Forum.
How do you use a Yocan Kodo
As for operating instructions for the Yocan Kodo, clicking on the power button 5 times in rapid succession cycles the Yocan Kodo between an on and off state while 2 clicks activate its preheat function. Unfortunately there's no draw to activate feature similar to what we've seen in the CCell battery.
How do you change the temperature on Yocan Kodo
Power the Yocan Kodo Box Mod Vaporizer on by clicking the power button 5 times. Tap the power button three times rapidly to toggle in between heat settings.
How do I change the temperature on my Yocan
The Rundown
- To turn it on, click the button five times.
- For 3 to 5 seconds, hold the main button to set it into your desired temperature.
- Adjust the temperature using the up and down buttons.
- Start vaping!
Why is my Yocan not working
You can usually fix it by adjusting the cartridge center pin with a pair of needle-nose pliers. Giving it a slight turn about 2 or more degrees can resolve a short. If you continue to have problems, please retain the affected device and submit your question on Yocan Vaping Forum.
Why is my ooze pen blinking green when I try to hit it
1. YOUR OOZE VAPE PEN IS DEAD AND NEEDS TO BE CHARGED. One of the most common reasons your Ooze pen is blinking green is because the battery has died and needs to be charged. When your Ooze vapor battery is dead, it will typically flash green 10-15 times.