How do I get my Yocan to work
- The Yocan Evolve 3-in-1 is powered on by five button presses.
- Choose the atomizer you want to use, then connect it to the battery.
- Fill the chamber with the quantity of material you desire.
- Push the button.
How do you use a Yocan vape pen
Using the Yocan Evolve 3 in 1
- To turn on the device, press the button five times.
- Connect the battery to the desired atomizer.
- Once the coil is screwed in, press and hold the button until it lights up and is ready for use.
- Fill the chamber with the proper volume of wax or dry herb.
- After the 2-second mark, press the button and vape.
How do I know when my Yocan is charged
When the battery is fully charged, the indicator light turns off and the battery stops glowing after approximately an hour.
Why is my Yocan not working
If your Yocan Magneto still isnt working, try using a q-tip with isopropyl alcohol to clean the contact points. If that doesnt work, try installing a brand-new coil or atomizer. If that doesnt work either, please contact the shop where you purchased it; they can help you fix this issue.
How do I change my Yocan settings
Press and hold the power button, choose your preferred temperature setting, and press the power button five times to activate the battery.
How long does Yocan evolve plus battery last
Hanging Ring & Detachable Silicone Compartment
|Yocan Evolve Plus XL Specs
|115mm H x 22mm W
|1400mah, 25W when fully charged, 3-4 hours for a full recharge
|Medical-grade quartz, titanium
Why is my Yocan battery blinking 3 times
Typically, when your Yocan vaporizer blinks three times, it means that the battery is experiencing a short circuit. To fix this, you can either replace the cartridge or the atomizer or loosen up the connection between the battery and the heating element.
Why does my battery blink 3 times
Most standard e-cig batteries have short circuit protection, so when there is a short and you press the fire button, it will simply blink three times and then do nothing. Some batteries will flash three times to indicate a short circuit.
How does a Yocan uni work
This vape is perfectly capable of vaporizing all of your oils, dry herbs, and waxes; however, the Uni does not give users full control over wattage. The Uni is powered by a strong 650mAh battery with three different pre-set wattages; there is also a standard firing button with this mod.
How do you hit the Yocan hit
Press and hold the power button of the Yocan HIT Vaporizer and once the Yocan HIT Vaporizer produces vapors pull and draw from the mouthpiece. Once the Yocan HIT Vaporizer is loaded, press your lips near the mouthpiece of the cartridge or your atomizer and get ready to inhale.
How do I turn on my Yocan battery
Press the power button five times quickly to turn on the device with a fully charged battery. Press the power button and hold it down to turn on the heating element. Let the button go to turn it off.
Why is my Yocan blinking 10 times
Recharging your battery is the simple solution to this issue because we know that when the Yocan Evolve Plus XL blinks 10 times, the device needs to be charged, and when the G Pen blinks 10 times, the battery is essentially dead.
How do I know if my Yocan is charging
The Yocan Evolve Charger has an LED light indicator at the charging end that lets you know when the battery is fully charged and when it is still charging using the 510 threaded connection from the battery to the charger.
Why does my Yocan battery keep saying no atomizer
When your vape mod or pod vape isnt reading your coil correctly, the words “Check Atomizer” or “No Atomizer” will appear. This could be because the 510 connector, where the tank screws onto the mod, isnt reading properly, the coil isnt making proper contact inside the tank, or there might be a short.
Why is my Yocan magneto blinking 4 times
When you press the power button on your device, it will blink four times if a wax atomizer is not connected to the battery or is not connected properly.
How do you use a Yocan battery
When using the Yocan Armor Battery, turn it on by quickly pressing the power button five times. Press the power button and hold it down to turn on the heating element. Let go of the button to turn it off.
How do I know my Yocan is charged
The Yocan B-Smart USB Charging Adapter has an LED light indicator that can help you determine when the battery is completely charged. It can also be used by plugging it into a desktop or laptop computer.
How do you preheat a Yocan vaporizer
Yocan Rega design features a preheat function that can be activated by simply pressing the power button twice. The preheat function will automatically turn off after 10 seconds, and you can deactivate it by pressing the power button twice more.