Can you hit a Puffco peak while its charging
Battery and charging Technically, you can use the Puffco Peak while its charging, but its not advised because the Peak wont actually be charging because all the power will be used to heat it up.
How long does Puffco plus take to charge
Take your Puffco Plus and unscrew it just above the button to reveal the charge connection. Screw the bottom half of your Plus (the battery) onto the USB Charger. A full charge will take approximately 30 minutes, and should last around 50 hits. Before we start our first session.
Why does my Puffco peak flash red when charging
What Should I Do If The Light On My Device Occasionally Flashes Red While Charging? Dont worry, this simply indicates that the device has overheated; after a brief period of cooling off, normal functionality/charging will resume.
Why is my Puffco peak blinking white
Please try removing the chamber from the base and reattaching, making sure the chamber is fully seated and attached to the base.July 10, 2022. Dont worry, this is simply an indication that your chamber is not attached.
Why is my peak flashing colors
The first suggestion is to remove the atomizer, clean the connection pins with a cotton swab dipped in iso, and reattach the atomizer.July 12, 2022 The rainbow light is an indication that there is a connection issue between the base and atomizer and does not necessarily mean that anything is broken or defective.
Why does my Puffco blink red and blue
The red-blue flashing response from your Peak Pro indicates a chamber connection error. Please try first removing and cleaning the chamber from the device, submerging the chamber in 90% isopropyl alcohol for 20 minutes (never use water – only use 99% ISO!). May 9, 2022
Why do Puffco peaks blink 5 times
If the light is flashing five times, there is a short circuit somewhere in the device. For more help, get in touch with our support team.
How long does Puffco peak battery last
Please be aware that frequently using “Sesh Mode” will shorten battery life; a fully charged Peak battery should last approximately 30 heating cycles before requiring recharge.
Why is my Puffco plus blinking
When the Puffco Plus battery needs to be recharged, the light on the battery will flash ten times. Use the charger that came with your Puffco kit to do so.
Does Puffco peak turn off automatically
You can keep clicking for the duration of your session and the Peak will maintain the same temperature throughout. The Peak will automatically turn itself off after about 10 seconds to conserve battery, but can be quickly reactivated with another double-click.
Why wont my Puffco peak heat up
We always advise cleaning the gold connection pins found on the top of the battery and the underside of the chamber in the event that the battery is operating as intended but your chamber still wont heat.Jun 20, 2022
Can you soak Puffco plus chamber in alcohol
This Puffco Plus is ready for a deep clean! Drop the oven chamber and the dart in some rubbing alcohol and let them soak for a few hours. In the meantime, wipe any sticky gunk off the inside of the metal mouthpiece housing with a cotton swab dipped in rubbing alcohol. Mar 3, 2022.
Why is my Puffco Peak Pro not charging
Please try completely shutting down the device (hold the button for 3-6 seconds until you feel the device vibrate and power down) and then connecting to the charger if youre having trouble getting it to charge. You might also want to try a different micro USB charger cable.
Can I use my Puffco before fully charged
1. Before using your Peak for the first time, make sure it is fully charged. The Peak should take about 2.5 hours to fully charge; during this time, the white light on the device will pulse and then turn off on its own.
Why is my Puffco blinking red 3 times
Red light holds: Device overheated. Red light flashes three times: Low battery. Five times: Short circuit.
Why is my Puffco peak flashing rainbow
The first suggestion is to remove the atomizer, clean the connection pins with a cotton swab dipped in iso, and then reattach the atomizer. The rainbow light is an indication that there is a connection issue between the base and atomizer and does not necessarily mean that anything is broken or defective.
How long does the Puffco Peak Pro battery last
Please be aware that frequently using “Sesh Mode” will shorten battery life; a fully charged Peak Pro battery should last about 30 heating cycles before requiring recharge.
What does it mean when my Puffco Peak Pro flashes red and blue
Please try first removing and cleaning the chamber from the device, then soaking the chamber in 90% isopropyl alcohol for 20 minutes if the red-blue flashing response from your Peak Pro continues. May 9, 2022