What kind of battery does the Smok Rigel Mini use
The high-performance SMOK RIGEL Mini Box Mod Kit supports pass-through vaping with USB type-C charging and has an adjustable power range of 1-80W output using a single, replaceable 18650 battery (sold separately).
Why is my Smok Rigel not working
Replace the atomizer coil if the SMOK Rigel is still not functioning. If you see the message “Atomizer Short,” there is a problem with the atomizer coil.
What coil does the Smok Rigel take
Its a respectable little tank with a working wattage range of 40 to 90 Watts and V9 coils rated at 0.15 ohms.
What tanks are compatible with Smok Rigel
Check out the SMOK RIGEL 230W Starter Kit, which includes a TFV9 Sub-Ohm Tank and dual 18650 batteries with an output range of 1-230W. The TFV9 is also cross-compatible with the venerable TFV8 Baby Coils.
How do you unlock the Smok power
To lock or unlock the Smok M80, press the main fire button five times quickly. You can also turn off the device to save battery life by going into the menu system. The Smok M80 has a 5 click lock system to prevent accidental misfires while your device is being stored.
How do you turn on Smok vape after charging
Turning on Your SMOK Vape
- First, locate your device's main fire button, which also functions as the power on/off button.
- To access the device menu after unlocking your device, press the main fire button three times.
- After you've enjoyed a good vape session, turn off your SMOK device by accessing the menu system again.
How do you fill a Smok Rigel
Smok Rigel – How to Fill the Tank
- The fill port can be seen by raising and rotating the top cap away from the tank.
- Squeeze E liquid into the tank while gently inserting the bottle nozzle into the fill port.
- Push the lid down into place after sliding the top cap back into a locked position.
How do I reset my Smok
Reset the tank: To “reset” the tank, detach it from the mod, check that the screws are tight, and press the fire button. When you reattach the tank, choose “n” when prompted to choose a new coil.Nov 18, 2021
Why is my Smok morph leaking
It may experience leaking issues if the liquid on the coil hasnt been properly atomized with low wattage, so please try to vape at that wattage or higher. In addition, please close all the airholes when youre not using it.
Why does my Smok vape say no atomizer
When your vape mod or pod vape isnt reading your coil correctly, the words “Check Atomizer” or “No Atomizer” will appear. This could be because the 510 connector, where the tank screws onto the mod, isnt reading properly, the coil isnt making proper contact inside the tank, or there might be a short.
What does it mean when your vape says Ohm too high
Ohms error messages from SMOK are specifically related to the resistance of your coil(s) and indicate that a coil is not compatible with the device. Usually, pairing the proper SMOK-branded coils with your SMOK device is the easiest way to fix this issue.
What coils are compatible with Smok TFV9 tank
These coils are compatible with SMOKs TFV8 Baby, TFV8 Big Baby, and TFV12 Baby Prince tanks, as well as the TFV9 Sub-Ohm Tank. TFV9 Coil Series: 0.15ohm Mesh Coils (40-90W)
Does the Smok Rigel kit come with batteries
Please be aware that the Smok Rigel kit requires two 18650 batteries, which are available here and are sold separately.
What tanks are compatible with Smok Rigel mini
The TFV9 Mini Tank that is included with the Smok Rigel Mini Kit is made to work with Smok TFV9 Meshed Coils, which come in 0.15 Ohm resistance. However, the Smok TFV9 Tank is also compatible with “Baby Beast” coils.
How do you fix a vape that wont turn on
Try the following:
- Check if you've pressed the power. Check if you've pressed the power button too often and turned it off.
- Verify whether you need to charge it.
- Look for connectivity problems.
- Visit our page on battery safety.
- Examine your atomizer.
- Verify the 510 pin.
- Examine your coil.
- Check your tank isn't over tightened.
Why is my SMOK vape not working
Check the pod if the battery is fully charged or youre still unable to vape after charging the battery, as this could indicate that the battery is simply dead. If the battery is not fully charged or youre still unable to vape after charging the battery, this could indicate that the pod is the problem.
Why is my SMOK vape blinking 4 times
Resistance protection: The LED light will blink four times and the battery will automatically turn off the output when the atomizer resistance is lower than 0.1 ohms or higher than 2.5 ohms.
Does Smok Rigel need batteries
Wattage Output Range: 1-230W. Dual High-Amp 18650 Batteries are not included with the SMOK RIGEL 230W Box Mod.