How do you turn on Puffco peak
To turn it on, click and hold the button for three seconds, until it vibrates and the band light turns white. Click once to bump the temperature up a level, all the way up to the highest temperature (White Light). Double click to activate the heater and let it run a full cycle.
Why does my Puffco blink white
My Device Keeps Flashing White 3 Times. What do I do? Not to worry, this is simply an indication that your chamber is not attached. Please try removing the chamber from the base and reattaching.
How do you know when a Puffco peak is charged
How do I charge my Puffco Peak? Simply plug the base of your device into a wall outlet via the USB charger included with your Peak. While charging, the white light will pulse and the light will automatically turn off once the device is fully charged. A depleted battery will fully charge in about 2.5 hours.
Why wont my Puffco peak heat up
If the battery is functioning as intended and your chamber won't heat you may be experiencing a connection issue. In this case we always recommend cleaning the gold connection pins located on the top of the battery and the underside of the chamber.
Can you hit a Puffco peak while its charging
Battery and charging
So, can you use the Puffco Peak while charging? Well, technically yes though it's not recommended. You can get a dab out of it, but the Peak won't actually be charging since all the power will be used to heat it up.
Why do Puffco peaks blink 5 times
The 5x flashing light is to indicate that there is a short circuit somewhere in the device. Contact our support team for further assistance.
Why is my Puffco peak flashing rainbow
The rainbow light is an indication that there is a connection issue between the base and atomizer & does not necessarily mean that anything is broken or defective. The first tip is to remove the atomizer, clean the connection pins with a cotton swab dipped in iso, and reattach the atomizer.
What does it mean when your Puffco peak flashes all colors
The rainbow light is an indication that there is a connection issue between the base and atomizer & does not necessarily mean that anything is broken or defective. The first tip is to remove the atomizer, clean the connection pins with a cotton swab dipped in iso and reattach the atomizer.
Why is my Puffco Peak Pro blinking red and blue
The red-blue flashing response from your Peak Pro is a sign of a chamber connection error. Please try first removing and cleaning the chamber from the device. Submerge the chamber in 90%+ Isopropyl Alcohol for 20 minutes. Never use water – 99% ISO only!).
Why is my Puffco Peak Pro not charging
If you're unable to get the device to charge, please try shutting the device down completely (hold the button for 3-6 seconds until you feel the device vibrate and power down) and then attaching to the charger. You may also want to try a different micro usb charger cable.
How often should I clean my Puffco peak
A good rule of thumb is to thoroughly clean the Peak each time the battery fully depletes and needs to be recharged. The atomizer itself should be soaked in ISO anytime you notice excess flooding or get a rainbow light response from the device.
Why is my Puffco peak blinking white while charging
1. Make sure that your Peak is fully charged before your first use. The white light on the unit will pulse while it's charging and will automatically turn off once fully charged.
Does Puffco peak turn off automatically
The Peak will automatically turn itself off after about 10 seconds to conserve battery but can quickly be reactivated with another double-click. You can keep clicking for the duration of your session and the Peak will maintain the same temperature throughout.
Why is my Puffco blinking red 3 times
Not to worry, this simply means that the device has overheated. Simply let the Peak cool down for a little while and normal functionality/charging will resume. If your device is overheating while on the charger you should expect the charge time to take a little over 2.5 hours.
Why is my Puffco blinking red and blue
The red-blue flashing response from your Peak Pro is a sign of a chamber connection error. Please try first removing and cleaning the chamber from the device. Submerge the chamber in 90%+ Isopropyl Alcohol for 20 minutes. Never use water – 99% ISO only!).
Why is my Puffco plus not hitting
Sometimes even the smallest bit of debris can cause a bad connection which stops the pen from working at it's full potential. To start, we recommend that you try cleaning the gold connection pins between the battery and atomizer to alleviate any connection issues that may be occurring between the two.
What does it mean when my Puffco blinks 3 times
3 red flashes: Indicates low battery. 5 light flashes: Indicates short circuit. Red light holds: Device overheated.
How do you fix a Puffco Peak Pro
Hold the atomizer in one hand and while maintaining the slight twist with the tool, pull back gradually applying more force until the metal/ceramic rings pop out. If you have a really dirty atomizer and the alcohol did not fully clean it, you can apply some heat to the outer ring.
Related Question Answers

Brian Ward
Professionalbiodegradable discover card

Edward Griffin
ProfessionalAre Valyrian and Valyrian 2 coils interchangeable?

Miguel Lopez
Professionalcake bar disposable

Miles Ramirez
Professionalboveda cvault

Jason Clark
Professionalblueberry air bar

Malcolm Morris
Guestboost vape

Robert Russell
Guestblue razz vape

Edward Morgan
Guestblu e cig disposable price

Devin Ross
Guestbirdcage percolator

Austin Martin
Guestbirthday cake cart

Xavier Johnson
Professorbird cage with glass front

Anthony Collins
Professor$10 vapes

Rodrigo Johnson
Professorbigshot torch

Ashton Diaz
Professorbigshot blazer

David Robinson
Professorbiggest puff bar

Zachary Bryant
Userbanana ice puff bar 10 pack

Peter Gonzalez
Userbanana ice onee stick

Thomas Jenkins
Userbanana ice kangvape

Benjamin Murphy
User$10 vape pen
