What is airCube router
Ubiquiti Networks introduces the airCube ACB-AC Wi-Fi Router, a cost-effective wireless access point for use in your customer deployments. With a compact design and integrated 24V PoE passthrough, the airCube is a home Wi-Fi access point designed to interoperate with airMAX CPEs and is available in two models.
How do I connect my airCube to the Internet
Connect one end of an Ethernet cable to the WAN Port on the back of the airCube. Connect the other end of the Ethernet cable to your airMAX CPE radio. 2. Connect the Power Adapter to the Power Port on the back of the airCube.
Why is my airCube not working
1) Unplug Aircube (the black wifi box) from the mains and leave it off for 3 minutes. 2) Remove any cables that you have plugged into the lower ports on the back of the cube TAKING care not to unplug the upper two CABLES. 3) If you have any range extenders, remove power to them (unplug them).
How do I reset my airCube router
The LED lights up when the airCube is powered on. Resets to factory defaults. The device should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the LED starts flashing and then becomes solidly lit.
How do I reset my password on my airCube router
10 Step Guide To Change Network Password- AirCube
- Go into UNMS application tap the “+” sign, then SCAN QR CODE on the bottom of cube.
- Wait a few minutes for app to load up…………… …
- Now In wireless, click 5Ghz radio and change the 5Ghz password and click DONE in the top right corner of your screen.
More items…
What is an airCube used for
With a compact design and integrated 24V PoE passthrough, airCube AC is a high-performance home Wi-Fi access point made to interoperate with airMAX CPE devices, with remote management by UISP.
What does an airCube do
Ubiquiti Networks' airCube ISP is a cost-effective wireless access point for use in your customer deployments. It offers convenient PoE passthrough to power a 24V airMAX CPE device, so you can use a single PoE adapter to power both devices. … UNMS Provides advanced remote control of Ubiquiti devices.
How does an airCube work
The airCube can be powered in one of two ways: 5V Micro USB adapter or 24V PoE on LAN Port 1. If using a Micro-USB power adapter (not included) to power the airCube, connect the power adapter to the Power Port on the back of the airCube and the other end of the adapter to a power outlet.
How do I reset my airCube ISP
The LED lights up when the airCube is powered on. Resets to factory defaults. The device should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the LED starts flashing and then becomes solidly lit.
How do I access my airCube router
Open the web browser and type the IP address of the device in the address bar (default is http://192.168.1.1). Press Enter. Type the username and password in the login page, the default username is 'ubnt' and the password can be found on the sticker on the bottom of the airCube.